Very happy with my purchase. The pictures on the website are exactly what I got.
 |
High-performance Japanese Tanto Sword Real Hamon |
My first Naganata. I'm hooked. The most solid and we'll balanced sword I have purchased yet. The wooden Saya is a thing of beauty. The entire sword is gorgeous from top to bottom. It came perfect out of the box. Sharp, no rattles, fits perfectly in the saya. It will be my main blade to practise with going forward. Great job!
 |
Handmade Japanese Naginata Samurai Sword T10 Carbon Steel Real Hamon |
The sheath of the katana does not fit the blade, because the blade wobbles inside.
 |
High-performance Japanese Katana Sword T10 Carbon Steel Full Tang |
2nd sword from here. Happy’
All good except carrier was being silly, not their fault but hence the 4 stars.
 |
Handmade Full Tang Japanese Samurai Sword With 1060 Carbon Steel |
Nicely made and looks good. Blade is nowhere near "razor edge sharp" as claimed.
 |
High-performance Japanese Katana Sword T10 Folded Clay Tempered Steel |
Great sword it’s a work of art. Fantastic company with the best communication.
|
High-performance Japanese Katana Sword T10 Carbon Steel Full Tang |
I received the sword in a very timely manner. Getting shipped from China and arriving on my doorstep in a little over a week is pretty dang good. The sword overall is really sturdy and everything fits well. The only two gripes that I have are that the the piece that fits on the bottom of the handel wasn't ornamented. The other is that the blade is dull,dull,dull! I've ordered a sword previously from True Katana and that blade was great! I will have to get this sword sharpened or I've just bought a very expensive butter knife. By the way.. I love the instruction booklet. Don't put the sword in your mouth lol!
 |
Handmade Ninjato Straight Japanese Sword Spring Steel With Black Blade |
The order arrived quickly. The weapon was beautiful. The scabbard holds the sword without slipping and the weight is just right. There was no rattle between the blade and the handle. I'm new to katana training, but even with my poor skill, I easily sliced through a water bottle. I'm very pleased with my purchase.
 |
Handmade Japanese Blind Fury Zatoichi Stick Sword Spring Steel |
Awesome purchase, the spirit of my tachi has returned to me. What's more, mine was forged with a bo-hi, astonshing crafstmanship, without a shadow of a doubt!
 |
Japanese Tachi Odachi Sword With Damascus Steel With Blue Scabbard |
I wanted a relatively cheap display piece I got what I ordered.
|
Japanese Tachi Odachi Sword With Damascus Steel With Blue Scabbard |
I have purchased these three swords as samples to see if they would be a viable product line to offer in our businesses and martial art centers.
Here are my findings:
All three swords are aesthetically pleasing and the fittings are ornate. I feel these would be a pleasant addition to a display or collection or for a beginning practitioner.
For someone looking for a sword to practice or cut with regularly, the product we received may not be the best products. Here are some reasons for this.
Two of the three blades were noticeable sharpened on a belt grinder and the edge geometry was a bit inconsistent. 2 of the 3 passed a paper cut test.
The two "folded" blades (the katana and naginata) are not folded steel, even under magnification. We have also observed a few imperfections such as chipping, staining and rolled tips but those appear to only be cosmetic. While the folding is not critical with modern steel, the appearance it provides would help sell the product and was a reason we chose them. The unfolded T10 material would be functionally sufficient. Also note that the cost was higher for these "folded" versions.
The hamon on each blade was very light, though looks nice, does not carry the deep gray appearance despite the fine polish. I am concerned how sufficiently heat treated the edge may truly be.
The fitment of the habaki is fairly loose, only fitting the mune and ha properly.
The Tachi shares the same profile and curvature as the katana and is the same length despite being listed as a longer blade.
All three swords show some fitment issues where things are misaligned or roughly ground to fit. The koiguchi and shito-dome are prime examples of this on the naginata as they exhibit grinding or chisel marks of fitting the blade. The naginata Saya sticks at every insertion and retraction of the blade.
The tsuka profiles of each were a bit blocky and the tsuka-ito is fairly wide, adding bulk to the grip. Very much a factory made handle.
Each sword came with manual the states the blades should not be used for cutting. We were able to confirm with customer service that it was ok to perform tameshigiri with the blades. They expressed the manual was a meant to be more of a cautionary document than a disclaimer.
We completed testing the sample products. In short, they do cut but only ok. We performed 6 cuts with each blade on rolled tatami omote, mounted on a regulation stand, in a vertical fashion. The tatami was rolled tight with no center material such as bamboo to ensure consistency in each cut.
We observed some ha (edge) deformation and marks left on the hiraji and shinogi (angled blade body surface) but nothing substantial. This is likely due to the edge and blade geometry being fairly flat (vs more convex) and a maybe the blades not being heat treated as hard as they could be.
We also did notice the fuchi was loose on the katana after completing the cuts. This can be corrected easily but should not happen on a new blade.
For a newer practitioner, these swords would be fine.
I am a bit discouraged with the customer service when we provided similar feedback and asked about the katana and naginate not being folded. They were somewhat accusatory and reluctantly did provide an RMA stating that we could return the blades only if they were still in the original packaging and unused. In short, we opted not to return the swords due to the packaging being discarded and to continue our testing. Our intent is to keep these products as examples for our clients and students and to showcase features that may or may not be satisfactory.
For practitioners seeking a functional sword, there may be some value at investigating True Katana's performance line. My experience may not be inclusive to all their products but the customer service was disconcerting. I will recommend the hanwei product line before True Katana in the future.
 |
Handmade Japanese Tachi Odachi Sword High Manganese Steel Real Hamon Full Tang |
The sword is a little veiled, and the tang is only held by one rivet and not two as in the photo. Otherwise the saber seems of good quality and the finishes are nice.
 |
Handmade Real Japanese Sword T10 Folded Clay Tempered Steel |
For me this seemed like alot of money to spend on a sword. But, that thought changed as soon as I saw and handled it. Ot was exactly as described and then some. Beautiful perfectly balanced sword, Tsuba and case.
A true work of art that will be proudly used and displayed.
 |
High-performance Japanese Katana Sword T10 Carbon Steel Real Hamon |
The item is beautiful.
The blade is sharp.
The Saya needs some love.
Thank you for a good product.
 |
Handmade Japanese Blind Fury Zatoichi Stick Sword T10 Carbon Steel Real Hamon |
This is my second Purchase from True Katana and I am very happy. My Katana and Wakizashi are beautiful pieces of art. I will be purchasing a High Performance Katana in the near future.
 |
High-performance T10 Carbon Steel Real Hamon Japanese Wakizashi Sword With Green Scabbard |
Amazing work on the blade, I just wish the guard was metal too, instead of plastic, other than that it’s pretty nice
|
Handmade Japanese Tachi Odachi Sword High Manganese Steel Real Hamon Full Tang |
The quality is incredible. One of my favorite sites on the internet currently.
|
Handmade Ninjato Straight Japanese Sword Spring Steel With Black Blade |
I was impressed with this product, especially with the first product I bought wasn't that great but this product is quite solid although the price is a bit up there. Happy either way and now I know more about the True katana company for others to learn.
 |
Handmade Japanese Katana Sword Damascus Steel Hand Forge |
Definitely worth the purchase, sword and scabbard were both in amazing condition with no scufs or marks. Sword is light but durable, and fun to swing. All I need now is to order a wakizashi from truekatana to hang below it!
|
Handmade Real Japanese Sword T10 Folded Clay Tempered Steel |
Very satisfied. The color and overall size and weight are very nice.
|
Handmade Japanese Blind Fury Zatoichi Stick Sword T10 Carbon Steel Real Hamon |
